Sell A515 GRADE 70 steel plates
Qfsteels produce and export ASTM A515 GRADE 70 A515 GRADE 70 steel plates ,heavy plate and wide, heavy plate, Which is a large steel plate supplier mill at Qfsteels Group.
Keyword: A515 GRADE 70,ASTM A515 GRADE 70,A515 GRADE 70 Steel,A515 GRADE 70 HIC,A515 GRADE 70 NACE
- A515 GRADE 70 Adopt standard: ASTM A515 GRADE 70 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- A515 GRADE 70 Specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mm
- Third Party Inspection for A515 GRADE 70: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department.
- A515 GRADE 70 steel plates Chemical composition % of the Product analysis of grade
| A515 Grade 70 Chemical Composition | |||||
| Grade | The Element Max (%) | ||||
| C | Mn | P | S | Si | |
| A515 Grade 70 | 0.30-0.35 | 1.30 | 0.035 | 0.035 | 0.13-0.45 |
- A515 GRADE 70 Mechanical Property
| Grade | A515 Grade 70 Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A515 Grade 70 | mm | Min MPa | MPa | Min % |
| 200 | 260 | 485-620 | 17 | |
| 50 | 21 | |||
ASTM A515 GRADE 70 steel plates 40mm and under in thickness is normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. ASTM A515 GRADE 70 grade plates over 50mm in thickness shall be normalized.
- Delivery Time Or Lead Time: 15-30days
- Extra Service: Pretreatment (Shot Blasting, Sand Blast, Painting and Galvanized), Cutting Parts, Sample Service, Third Party inspection, UT Test and Size inspection.
- If you have any requirement in steel plate for A515 GRADE 70, please feel free to contact us by email of calling.
- If you had any question at our plate or service. Please contact our after service department to get faster reply.
Qfsteels Group Company Principle
More Cheaper Price,
More Faster Delivery,
The Best Company Prestige,
The Best After sales service,
The One step Steel material Solution
The Best Professional quality control system
Supplementary Requirements
S2. Product Analysis, S8: Ultrasonic Examination
S3: Simulated pos-weld heat treatment of mechanical
S15: Reduction of area measurement and test coupons
S18: Maximum Tensile strength
S6: Drop weight test